Auto HID Bulb H4

HID Xenon Lamp Technical Parameter:
1. Input Voltage to detect:
High input voltage 23+_0.5V or low input voltage 6.5V+_0.5V will be protected, if the voltage is back to normal >= 8V+_0.3V, the stabilizer can be restart.
2. Input Starting Current: <= 8A+_0.5A (Input 12V);
3. Stable Current: 3.2A± 0.15A (Input 12V);
4. From the start to the stabilization time: <= 40S (Input 8A-4A);
5. Steady shot and waterproof: Accord with auto technology-related standard;
6. Output short circuit protection:
Time <= 2S, start ballast every 2S, test 10S and the ballast is normal;
7. Output short circuit protection:
Time <= 2S, start ballast every 2S, test 10S and the ballast is normal;
8. Continuous turning on and off the Xenon lamp:
Starting just want need 1s, and test 20s then the ballast is normal;
9. Continuous opening:
Don't take the load to start ballast, test 10s (5 times), the ballast is normal;
10. Continuous short-circuit:
Do not take the load to start ballast every 1s, test 10s (5 times), and then the ballast is normal;
11. Continuous working:
Continuous with xenon lamp, after 7 days the ballast is normal;
12. Load-adaptive test:
Access all kinds of xenon lamp (including the brand, a variety of aging xenon lamp) the ballast works properly;
13. EMC/EMI:
Accord with the car-related standards and will not affect a vehicle's computer Wrench and radio.